Posts Tagged ' Jewelry Making '

To read the previous parts of this report, click on the following links. Ring with a grief 1. I finished the crown setting ring that I started last month. In here fitting the crown bezel … [Read more]

1. This ring will be similar for the previous one but made in a different technique. Here are the top parts curved from a silverplate. 2. Figuring out the design for the stones once … [Read more]

1. For this ring I started by making two inner rings. 2. Then I fused a thick plate of silver. 3. I pull it in a rolling mill for the right thickness. 4.… [Read more]

1. Measuring the right thickness of the silverplate for the grief. 2. Checking the plate is straight and marking where to saw it. 3. First I made a basic bezel and the… [Read more]

1. I made a same kind of a ring but stones all around it. I divided all the ring. 2. I drilled the holes and enlarged them based on the sizes of the stones. 3. Picture… [Read more]

To read the previous parts of this report, click on the following links. Florentine style ring Florentine style ring 2 1. I also started to engrave both the Florentine style rings we h… [Read more]

1. I made a basic simple ring from silver and divided the top into 7 parts with a saw. 2. For drilling the holes for the stones I hold the ring firmly in a wooden vice. … [Read more]

To read the previous parts of this report, click on the following links. Ring with stones 1. Choosing a center stone for my next ring. 2. I chosed an emerald cut amethyst a… [Read more]

1. Making the final soldering on this ring. I soldered the leaf-forms on the sides to hold up and balance the big top part. 2. Here both sides of the ring are better seenable. … [Read more]

1. After the geometrical style ring, I started another similar with curved midpiece and siderings, but the decoration will be more organic. 2. Soldering the midpiece. 3… [Read more]