Posts Tagged ' S.K. '

1. Measuring the right thickness of the silverplate for the grief. 2. Checking the plate is straight and marking where to saw it. 3. First I made a basic bezel and the… [Read more]

1. I made a same kind of a ring but stones all around it. I divided all the ring. 2. I drilled the holes and enlarged them based on the sizes of the stones. 3. Picture… [Read more]

To read the previous parts of this report, click on the following links. Florentine style ring Florentine style ring 2 1. I also started to engrave both the Florentine style rings we h… [Read more]

1. I made a basic simple ring from silver and divided the top into 7 parts with a saw. 2. For drilling the holes for the stones I hold the ring firmly in a wooden vice. … [Read more]

To read the previous parts of this report, click on the following links. Ring with stones 1. Choosing a center stone for my next ring. 2. I chosed an emerald cut amethyst a… [Read more]

1. Making the final soldering on this ring. I soldered the leaf-forms on the sides to hold up and balance the big top part. 2. Here both sides of the ring are better seenable. … [Read more]

1. After the geometrical style ring, I started another similar with curved midpiece and siderings, but the decoration will be more organic. 2. Soldering the midpiece. 3… [Read more]

To read the previous parts of this report, click on the following links. How to Making “HOLLOW RING” 1. I finally continued engraving the hollow ring, which was one of the first works we … [Read more]

To read the previous parts of this report, click on the following links. Florentine style earrings 1. Earrings are being attached to a sealing wax to be handly engraved. Earrings are made… [Read more]

To read the previous parts of this report, click on the following links. Buccellati style ring 1. The three pieces are tied together with an iron wire to keep them in right place while so… [Read more]